Dell 9.7(0.0) Enable optic-info-update interval, Enable optical-info-update interval seconds

Defaults

Command Modes

Command History

Usage Information

Related Commands

15

EXEC

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Added support for roles on the Z9000, S6000, S4820T,
	S4810, and MXL.
9.2(1.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series Original command.

Users entering EXEC Privilege mode or any other configured privilege level can access configuration commands. To protect against unauthorized access, use the enable password command to configure a password for the enable command at a specific privilege level. If no privilege level is specified, the default is privilege level 15.

NOTE: If you are authorized for the EXEC Privilege mode by your role, you do not need to enter an enable password.

enable password — configures a password for the enable command and to access a privilege level.

enable optic-info-update interval

Enable polling intervals of optical information updates for simple network management protocol (SNMP).

Syntax	enable optical-info-update interval seconds
	To disable optical power information updates, use the no enable optical-
	info-update interval command.

Control and Monitoring 99