Dell 9.7(0.0) manual Rate shape kbps rate burst-KB

Command Modes

Command History

Usage Information

rate shape

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

NOTE: Per Port rate police is supported for Layer 2 tagged and untagged switched traffic and for Layer 3 traffic. Per VLAN rate police is supported on only tagged ports with Layer 2 switched traffic.

S-Series

On one interface, you can configure the rate police command for a VLAN or you can configure the rate police command for an interface. For each physical interface, you can configure three rate police commands specifying different

VLANS.

Shape the traffic output on the selected interface.

S6000

Syntax	rate shape [kbps] rate [burst-KB]
Parameters	kbps	Enter the keyword kbps to specify the rate limit in Kilobits
		per second (Kbps). On S-Series, make the value a multiple of
		64. The range is from 0 to 40000000. The default granularity
		is Megabits per second (Mbps).
	rate	The range is from 10 to 40000.
	burst-KB	(OPTIONAL) Enter the burst size in KB. The range is from 0 to
		10000. The default is 50.
Defaults	Granularity for rate is Mbps unless you use the kbps option.
Command	INTERFACE
Modes

Quality of Service (QoS) 1251