Dell 9.7(0.0) manual Ip domain-name name

Usage Information

To fully enable DNS, also specify one or more domain name servers with the ip name-servercommand.

Dell Networking OS does not support sending DNS queries over a VLAN. DNS queries are sent out all other interfaces, including the Management port.

To view current bindings, use the show hosts command.

Related	ip name-server — specifies a DNS server.
Commands
	show hosts — Views the current bindings.

ip domain-name

Configure one domain name for the switch.

S6000

Syntax	ip domain-name name
	To remove the domain name, use the no ip domain-namecommand.
Parameters	name	Enter one domain name to be used to complete unqualified

names (that is, incomplete domain names that cannot be resolved).

Defaults

Command Modes

Command History

Not configured.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

764 IPv4 Routing