Dell 9.7(0.0) manual Snmp ifmib ifalias long, Series legacy command Example

VersionDescription

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series legacy command

Example	Dell#show snmp user
	User name: v1v2creadu
	Engine ID: 0000178B02000001E80214A8
	storage-type: nonvolatile	active
	Authentication Protocol: None
	Privacy Protocol: None

Dell#

snmp ifmib ifalias long

Display the entire description string through the Interface MIB, which would be truncated otherwise to 63 characters.

Syntax	snmp ifmib ifalias long
Defaults	Interface description truncated beyond 63 characters.
Command	CONFIGURATION
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

	Version	Description
	9.7(0.0)	Introduced on the S6000-ON.
	9.0.2.0	Introduced on the S6000.
	8.3.19.0	Introduced on the S4820T.
	8.3.11.1	Introduced on the Z9000.
	8.3.7.0	Introduced on the S4810.
	7.6.1.0	Introduced on the S-Series.
	7.5.1.0	Introduced on the C-Series.
	unknown	Introduced on the E-Series.
Example	Dell#config!	------command run on host connected to switch:
	--------------	!

> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 grep -i alias more

IF-MIB::ifAlias.134530304 = STRING: This is a port connected

Simple Network Management Protocol (SNMP) and Syslog 1479