Dell 9.7(0.0) manual Crypto key generate rsa rsa1, Rsa1

crypto key generate

Generate keys for the SSH server.

Syntax

Parameters

NOTE: Some of the parameters in this command require licensing to access. For more information, contact your Dell Networking representative.

crypto key generate {rsa rsa1}

rsa	Enter the keyword rsa then the key size to generate a SSHv2
	RSA host keys. The range is from 1024 to 2048 if you did not
	enable FIPS mode; if you enabled FIPS mode, you can only
	generate a 2048-bit key. The default is 1024.
	NOTE: You must have a license to access the FIPS mode.
	For more information, contact your Dell Networking
	representative.
rsa1	Enter the keyword rsa1 then the key size to generate a
	SSHv1 RSA host keys. The range is from 1024 to 2048. The
	default is 1024.
	NOTE: This option is not available in FIPS mode.

Defaults

Command Modes

Command History

Key size 1024; if you enable FIPS mode, the key size is 2048.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.12.0Added support for FIPS mode on the S4810.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

Security 1421