Dell 9.7(0.0) manual Timer, Syntaxtimer hello-interval milliseconds dead-interval

Usage Information

Example (Summary)

Example (1)

Example (2 Summary)

Related Commands

Executing this command without the optional ring-idcommand clears the statistics counters on all the available rings. Dell Networking OS requires a command line confirmation before the command is executed. This command clears the following counters:

•hello Rx and Tx counters

•Topology change Rx and Tx counters

•The number of state change counters

Dell#show frrp summary
Ring-ID State Mode			Ctrl_Vlan Member_Vlans
----------------------------------------------
2	UP	Master	2	11-20, 25,27-30
31	UP	Transit	31	40-41
50	Down	Transit	50	32
Dell#

Dell#show frrp 1

Ring protocol 1 is in Master mode Ring Protocol Interface:

Primary : TenGigabitEthernet 1/16 State: Forwarding

Secondary: Port-channel 100 State: Blocking

Control Vlan: 1

Ring protocol Timers: Hello-Interval 50 msec Dead-Interval 150 msec

Ring Master's MAC Address is 00:01:e8:13:a3:19 Topology Change Statistics: Tx:110 Rx:45 Hello Statistics: Tx:13028 Rx:12348

Number of state Changes: 34

Member Vlans: 1000-1009 Dell#

Dell#show frrp 2 summary

Dell#show frrp 2 summary

Ring-ID State Mode Ctrl_Vlan Member_Vlans

-----------------------------------------------

2	Up	Master 2	11-20, 25, 27-30
Dell#

protocol frrp — enters the resilient ring protocol and designate a ring identification.

timer

Set the hello interval or dead interval for the Ring control packets.

S6000

Syntaxtimer {hello-interval milliseconds} {dead-interval

milliseconds}

Force10 Resilient Ring Protocol (FRRP) 621