Dell 9.7(0.0) manual Show vlan, Dellconf-if-vl-100#show config, Id vlan-id, Name vlan

	Version	Description
	pre-6.2.1.1	Introduced on the E-Series.
Example	Dell(conf-if-vl-100)#show config
	!

interface Vlan 100 no ip address no shutdown

Dell(conf-if-vl-100)#

show vlan

Display the current VLAN configurations on the switch.

S6000

Syntax

Parameters

Command Modes

Command History

show vlan [brief id vlan-id name vlan-name]

brief	(OPTIONAL) Enter the keyword brief to display the
	following information:
	•	VLAN ID
	• VLAN name (left blank if none is configured)
	• Spanning Tree Group ID
	• MAC address aging time
	•	IP address
id vlan-id	(OPTIONAL) Enter the keyword id then a number from 1 to
	4094. Only information on the VLAN specified is displayed.
name vlan-	(OPTIONAL) Enter the keyword name then the name
name	configured for the VLAN. Only information on the VLAN
	named is displayed.

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

9.1.(0.0) Updated to support OpenFlow.

936 Layer 2