Command
Modes
ROUTER ISIS
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage
Information To prevent the link state database from receiving incorrect routing information
from unauthorized routers, use the area-password command on routers within
an area.
The configured password injects into Level 1 LSPs, CSNPs, and PSNPs.
Related
Commands •domain-password — allows you to set the authentication password for a
routing domain.
•isis password — allows you to configure an authentication password for an
interface.
clear config
Clear IS-IS configurations that display under the router isis heading of the show running-config
command output.
Syntax clear config
Command
Modes
ROUTER ISIS
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
Intermediate System to Intermediate System (IS-IS) 843