Usage
Information To control access to command modes, use this command to define a password for
a level and use the privilege level (CONFIGURATION mode) command.
Passwords must meet the following criteria:
• Start with a letter, not a number.
• Passwords can have a regular expression as the password. To create a
password with a regular expression in it, use CNTL + v prior to entering regular
expression. For example, to create the password abcd]e, you type “abcd CNTL
v ]e”. When the password is created, you do not use the CNTL + v key
combination and enter “abcd]e”.
NOTE: The question mark (?) and the tilde (~) are not supported characters.
Related
Commands show running-config — views the current configuration.
privilege level (CONFIGURATION mode) — controls access to the command
modes within the switch.
login authentication
To configure authentication for console or remote access, apply an authentication method list.
Syntax login authentication {method-list-name | default}
To use the local user/password database for login authentication, use the no
login authentication command.
Parameters method-list-
name
Enter the keywords method-list-name to specify that
method list, created in the aaa authentication login
command, to be applied to the designated terminal line.
default Enter the keyword default to specify that the default
method list, created in the aaa authentication login
command, is applied to the terminal line.
Defaults No authentication is performed on the console lines. Local authentication is
performed on the virtual terminal and auxiliary lines.
Command
Modes
LINE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.6.0.0 Revised introductory and usage guidelines description.
Security 1381