dot1x auth-server

Configure the authentication server to RADIUS.

Syntax

dot1x auth-server radius

Defaults

none

Command

CONFIGURATION

Modes

 

Command

This guide is platform-specific. For command information about other platforms,

History

refer to the relevant Dell Networking OS Command Line Reference Guide.

 

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

7.6.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series.

dot1x auth-type mab-only

To authenticate a device with MAC authentication bypass (MAB), only use the host MAC address.

Syntax

dot1x auth-type mab-only

Defaults

Disabled

Command

INTERFACE

Modes

 

Command

This guide is platform-specific. For command information about other platforms,

History

refer to the relevant Dell Networking OS Command Line Reference Guide.

 

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

802.1X

163

Page 163
Image 163
Dell 9.7(0.0) manual Dot1x auth-type mab-only, Dot1x auth-server radius