Version

Description

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

Version 6.1.1.0

Introduced

Usage

The output of the show interfaces command displays the configured rate

Information

interval, along with the collected traffic data.

Related

show interfaces — displays information on physical and virtual interfaces.

Commands

 

show config

Display the interface configuration.

S6000

Syntax

show config

Command

INTERFACE

Modes

 

Command

This guide is platform-specific. For command information about other platforms,

History

refer to the relevant Dell Networking OS Command Line Reference Guide.

 

The following is a list of the Dell Networking OS version history for this command.

Version

Description

Version 9.0.2.0

Introduced on the S6000.

Version 8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

pre-Version

Introduced on the E-Series.

6.2.1.0

 

Example

Dell(conf-if-fo-1/4)#show config

 

!

 

interface fortyGigE 1/4

 

no ip address

 

mtu 12000

 

switchport

698

Interfaces

Page 698
Image 698
Dell 9.7(0.0) manual Dellconf-if-fo-1/4#show config, Interface fortyGigE 1/4, No ip address, Mtu