Dell 9.7(0.0) manual Timers bgp, Command Modes Command History Example

Command Modes

Command History

Example

EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

7.6.1.0Introduced on the E-Series.

Dell#show running-config bgp

!

router bgp 100 network 1.1.11.1/32 network 1.1.12.1/32 network 1.1.13.1/32

neighbor 10.1.1.2 remote-as 200 neighbor 10.1.1.2 no shutdown

Dell#

timers bgp

Adjust the BGP Keep Alive and Hold Time timers.

S6000

Syntax	timers bgp keepalive holdtime
	To return to the default, use the no timers bgp command.
Parameters	keepalive	Enter a number for the time interval, in seconds, between
		keepalive messages sent to the neighbor routers. The range
		is from 1 to 65535. The default is 60 seconds.
	holdtime	Enter a number for the time interval, in seconds, between
		the last keepalive message and declaring the router dead.
		The range is from 3 to 65535. The default is 180 seconds.
Defaults	none

Border Gateway Protocol 453