Dell 9.7(0.0) manual Threshold, Field Description Estimated CAM, Status Allowed, L2ACL

Field	Description
Estimated CAM	Indicates the number of free CAM entries required (for the
per Port	classification rules) to apply the input policy map on a single
	interface.
	NOTE: The CAM entries for the default rule are not
	included in this column; a CAM entry for the default rule
	is always dedicated to a port and is always available for
	that interface.
Status (Allowed	Indicates if the input policy map configuration on an
ports)	interface belonging to a stack-unit/port-pipe is successful
	— Allowed (n) — or not successful — Exception. The
	allowed number (n) indicates the number of ports in that
	port-pipe on which the Policy Map can be applied
	successfully.

NOTE: In a Layer 2 Policy Map, IPv4/IPv6 rules are not allowed; therefore, the output contains only L2ACL CAM partition entries.

Example	Dell# test cam-usage service-policy input pmap_l2 stack-unit
	all
	For a L2 Input Policy Map pmap_l2, the output must be as
	follows,
	stack-unitPortpipeCAM PartitionAvailable CAMEstimated CAM
	Status				per Port
	(Allowed ports)		L2ACL	500	200
	0	0
	Allowed (2)	1	L2ACL	100	200
	0
	Exception	0	L2ACL	1000	200
	1
	Allowed (5)	1	L2ACL	0	200
	1
	Exception		…
			…
	13	1	…	400	200
			L2ACL
	Allowed (2)
	Dell#

threshold

Specify the minimum and maximum threshold values for the configured WRED profiles.

S6000

Syntaxthreshold min number max number max-drop-probability

Quality of Service (QoS) 1285