Dell 9.7(0.0) manual Ipv6 dhcp snooping vlan, No ipv6 dhcp snooping

Networking OS version 8.2.1.0 extends DHCP Snooping to Layer 2. You do not have to enable relay agent to snoop on Layer 2 interfaces.

ipv6 dhcp snooping

Enable DHCPv6 snooping globally for ipv6.

Syntax	[no] ipv6 dhcp snooping
	To disable the snooping globally, use the no ipv6 dhcp snooping command.
Defaults	Disabled
Command	CONFIGURATION
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.

ipv6 dhcp snooping vlan

Enable ipv6 DHCP Snooping on VLAN or range of VLANs.

Syntax [no] ip dhcp snooping vlan vlan-id

Parameters

Defaults

Command Modes

Command History

To disable the ipv6 dhcp snooping on VLAN basis or range of VLAN, use the no ipv6 dhcp snooping vlan <vlan-id> command.

vlan-id	Enter the name of a VLAN id or list of the VLANs to enable
	DHCP Snooping.
Disabled
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command-Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.

564 Dynamic Host Configuration Protocol (DHCP)