Usage Information

Related Commands

VersionDescription

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

Use this command to specify the name of the output QoS policy. Once output policy is specified, rate-shape, scheduler strict, bandwidth-percentage, and WRED can be defined. This command enables the qos-policy-output configuration mode —(conf-qos-policy-out).

bandwidth-percentage — assigns percentage of bandwidth to the class/queue.

wred — assigns yellow or green drop precedence.

rate-police

Specify the policing functionality on incoming traffic.

S6000

Syntax

rate-police [kbps] committed-rate[burst-KB] [peak [kbps] peak-

 

rate [burst-KB]]

 

Parameters

kbps

Enter the keyword kbps to specify the rate limit in Kilobits

 

 

 

per second (Kbps). Make the following value a multiple of 64.

 

 

The range is from 0 to 40000000. The default granularity is

 

 

Megabits per second (Mbps).

 

committed-

Enter the bandwidth in Mbps. The range is from 0 to 40000.

 

rate

 

 

burst-KB

(OPTIONAL) Enter the burst size in KB. The range is from 16

 

 

to 200000. The default is 100.

 

peak peak-rate

(OPTIONAL) Enter the keyword peak then a number to

 

 

specify the peak rate in Mbps. The range is from 0 to 40000.

 

 

The default is the same as designated for committed-rate.

Defaults

Burst size is 100KB. peak-rateis by default the same as committed-rate.

 

Granularity for committed-rateand peak-rateis Mbps unless you use the kbps

 

option.

 

Command

QOS-POLICY-IN

 

Modes

 

 

Command

This guide is platform-specific. For command information about other platforms,

History

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Quality of Service (QoS)

1269

Page 1269
Image 1269
Dell 9.7(0.0) manual Rate-police kbps committed-rate burst-KB peak kbps peak