The following example displays the SAV discard counters on a particular interface:
Dell> show ip dhcp snooping source-address-validation discard-
counters interface TenGigabitEthernet 1/1
deny access-list on TenGigabitEthernet 1/1
Total cam count 2
deny vlan 10 count (0 packets)
deny vlan 20 count (0 packets)
The following example displays the SAV discard counters on a port channel
interface:
Dell> show ip dhcp snooping source-address-validation discard-
counters interface portchannel 10
deny access-list on Port-channel 10 on stack-unit 0
Total cam count 1
deny vlan 10 count (0 packets)
deny access-list on Port-channel 10 on stack-unit 1
Total cam count 1
deny vlan 10 count (0 packets)
deny access-list on Port-channel 10 on stack-unit 2
Total cam count 1
deny vlan 10 count (0 packets)
NOTE: The output for port-channel interfaces does not display the physical
interface. If the LAG member interfaces belong to different stack-units, the
counters are displayed per stack-unit for that port channel.
show ipv6 dhcp snooping
Display the DHCPv6 snooping binding database.
Syntax show ipv6 dhcp snooping
Defaults none
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
Version 9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.
Example Dell#show ipv6 dhcp snooping
IPv6 DHCP Snooping : Enabled.
IPv6 DHCP Snooping Mac Verification : Disabled.
Database write-delay (In minutes) : 5
DHCP packets information
Snooping packets : 0
Snooping packets processed on L2 vlans : 0
Dynamic Host Configuration Protocol (DHCP) 577