Dell 9.7(0.0) Show ip pim rp, Field Description Neighbor address, Uptime/expires, Ver, Mapping

Usage Information

Example

VersionDescription

8.3.11.1Introduced on the Z9000.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Introduced on the S-Series.

The following describes the show ip pim neighbor command shown in the following example.

Field	Description
Neighbor address	Displays the IP address of the PIM neighbor.
Interface	List the interface type, with either slot/port information or ID
	(VLAN or Port Channel), on which the PIM neighbor was
	found.
Uptime/expires	Displays the amount of time the neighbor has been up then
	the amount of time until the neighbor is removed from the
	multicast routing table (that is, until the neighbor hold time
	expires).
Ver	Displays the PIM version number.
	• v2 = PIM version 2

DR prio/Mode Displays the Designated Router priority and the mode.

•1 = default Designated Router priority (use the ip pim dr-prioritycommand)

•DR = Designated Router

•S = Sparse mode

Dell#show ip pim neighbor			Ver	DR
Neighbor	Interface	Uptime/Expires
Address	Te 1/16	09:44:58/00:01:24	v2	Prio/Mode
127.87.3.4				1 / S
Dell#

show ip pim rp

View all multicast groups-to-RP mappings.

S6000

Syntax

Parameters

show ip pim [vrf vrf-name] rp [mapping group-address]

vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of
	the VRF to configure this setting on that VRF.
mapping	(OPTIONAL) Enter the keyword mapping to display the
	multicast groups-to-RP mapping and information on how
	RP is learnt.

PIM-Sparse Mode (PIM-SM) 1207