Dell 9.7(0.0) manual Ipv6 unknown-unicast, No ipv6 unknown-unicast, Description string

ipv6 unknown-unicast

Disable soft forwarding of unknown IPv6 destination packets.

S6000

Syntax

Defaults

Command Modes

Command History

[no] ipv6 unknown-unicast

Soft forwarding is enabled.

CONFIGURATION

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4(0.0)	Introduced on the S4810, S4820T, S6000, and Z9000.

Usage	All the default catch-all entries in the longest prefix match (LPM) table collect and
Information	transmit all unresolved IPv6 packets to the CPU, even if they are destined for
	unknown destinations.

description

Enables you to specify a descriptive name for a customer VRF.

Syntax description string

Parameters

Defaults

Command Modes

Command History

To delete the descriptive name for a customer VRF, use the no description string command.

string Enter a descriptive name for the VRF.

None.

VRF MODE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.
9.4.(0.0)	Introduced on the S-Series.

1608 Virtual Routing and Forwarding (VRF)