Dell 9.7(0.0) manual 710

Command Modes

Command History

Example

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

Dell#show interfaces stack-unit 1

TenGigabitEthernet 1/1 is down, line protocol is down Hardware is Force10Eth, address is 00:01:e8:4c:f2:82

Current address is 00:01:e8:4c:f2:82 Pluggable media not present Interface index is 34129154 Internet address is not set

MTU 1554 bytes, IP MTU 1500 bytes LineSpeed auto, Mode auto

ARP type: ARPA, ARP Timeout 04:00:00

Last clearing of "show interface" counters 3w0d17h Queueing strategy: fifo

Input Statistics:

0 packets, 0 bytes

5144 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts 0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte

pkts

0 Multicasts, 0 Broadcasts

0 runts, 0 giants, 0 throttles

0 CRC, 0 overrun, 0 discarded Output Statistics:

0 packets, 0 bytes, 0 underruns

0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts

0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts

0 Multicasts, 0 Broadcasts, 0 Unicasts

0 throttles, 0 discarded, 0 collisions Rate info (interval 299 seconds):

Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate

Time since last interface status change: 3w0d17h TenGigabitEthernet 1/2 is down, line protocol is down

Hardware is Force10Eth, address is 00:01:e8:4c:f2:83 Current address is 00:01:e8:4c:f2:83

!-------------output truncated ----------------!

710 Interfaces