Dell 9.7(0.0) manual Show cam-ipv6 extended-prefix, Ipv6 unicast-host-route

show cam-ipv6 extended-prefix

Display the current settings and next-boot settings for cam-ipv6 extended-prefix configuration. Display the cam-ipv6 extended-prefix configuration.

S6000

Syntax

Defaults

Command Modes

Command History

show cam-ipv6 extended-prefix

None

EXEC

EXEC Privilege

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.3(0.1)	Introduced on the S6000.

Usage	You can use this command to view the number of supported extended prefix
Information	entries in LPM configured. The output also displays the current applied value and
	the new value that is applicable after the reboot of the device.
Example	Dell# show cam-ipv6 extended-prefix
	Cam-Ipv6-LPM Extended Prefix
	--------------------------------
	Current Settings
	cam-ipv6-max-/65-to-/128-Prefix : 2048
	Dell(conf)#

ipv6 unicast-host-route

Enable programming of IPv6 /128 route prefixes in L3 host table.

S6000

Syntax

Defaults

Command Modes

Command History

[no] ipv6 unicast-host-route

Enabled by default. By default, all the IPv6/128 route prefixes are installed only in L3 host table.

CONFIGURATION

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.3(0.1)	Introduced on the S6000.

IPv6 Basics 821