Example

Related Commands

FieldDescription

bi-directional (interface is up, connected and hearing neighbor’s echoes).

err-disabled (only found when FEFD mode is aggressive and when the interface has not hearing its neighbor’s echoes for three times the message interval. To reset an interface in this state, use the fefd reset command.)

unknown (only found when FEFD mode is normal.

locally disabled (interface contains the fefd reset command in its configuration).

Admin Shutdown (interface is disabled with the shutdown command).

Dell#show fefd

FEFD is globally 'ON', interval is 10 seconds, mode is 'Aggressive'.

INTERFACE MODE

INTERVAL

STATE

Te 5/1

Aggressive

(second)

Admin Shutdown

10

Te 5/2

Aggressive

10

Admin Shutdown

Te 5/3

Aggressive

10

Admin Shutdown

Te 5/4

Aggressive

10

Admin Shutdown

Te 5/5

Aggressive

10

Admin Shutdown

Te 5/6

Aggressive

10

Admin Shutdown

Te 5/7

Aggressive

10

Admin Shutdown

Te 5/8

Aggressive

10

Admin Shutdown

Te 5/9

Aggressive

10

Admin Shutdown

Te 5/10

NA

NA

Locally disabled

Te 5/11

Aggressive

10

Err-disabled

Dell#

 

 

 

fefd — enables far-end failure detection.

fefd disable — disables FEFD on an interface only.

fefd-global — enables FEFD globally on the system.

fefd reset — resets all interfaces or a single interface that was in “error-disabled” mode.

952

Layer 2

Page 952
Image 952
Dell 9.7(0.0) manual Example Related Commands FieldDescription, Interface Mode Interval State