Dell 9.7(0.0) manual Show dot1x interface interface, Unauthorized

show dot1x interface

Display the 802.1X information on an interface.

Syntax	show dot1x interface interface
Parameters	interface	Enter one of the following keywords and slot/port or number

information:

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.

• For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.

Defaults

Command Modes

Command History

Example

none

•EXEC

•EXEC privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the C-Series, S-Series, and E-Series.

Dell#show dot1x interface fortyGigE 1/48

802.1x information on Fo 1/48:

-----------------------------

Dot1x Status:	Enable
Port Control:	AUTO
Port Auth Status:	UNAUTHORIZED
Re-Authentication:	Disable
Untagged VLAN id:	None
Guest VLAN:	Disable
Guest VLAN id:	NONE
Auth-Fail VLAN:	Disable
Auth-Fail VLAN id:	NONE

Security 1419