proxy-gateway static
Enables the proxy-gateway feature using static configurations.
S6000
Syntax [no] proxy-gateway static
Command
Modes
VLT DOMAIN
Command
History Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage
Information When proxy-gateway static configuration is added, the setting is saved in the Layer
2 module. When you remove the static proxy gateway configuration, each proxy-
gateway static mac configured is deleted from the Layer 2 module.
Example Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
remote-mac-address exclude-vlan
Configure the proxy-gateway static entry and exclude a VLAN or a range of VLANs from proxy routing.
S6000
Syntax [no] remote-mac-address mac—address [exclude-vlan vlan-range]
Parameters remote-mac-
address
Specify the mac-addresses of the VLT peers which are in the
remote VLT Domain.
mac-address Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn
format.
vlan-range Enter the VLAN IDs in which proxy gateway is not needed.
The VLANs are excluded from doing proxy gateway. The
value can be a single VLAN ID or comma -separated, VLAN
IDs or a range of VLAN IDs or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
VLT Proxy Gateway 1621