Dell 9.7(0.0) manual Show interface pfc

PFC Port Count : 56 (current), 56 (configured)

PFC Queue Count : 2 (current), 2 (configured)

show interface pfc

Displays the PFC configuration applied to ingress traffic on an interface, including priorities and link delay.

Syntax

Parameters

Command Modes

Command History

show interface port-type slot/port[] pfc {summary detail}

port-type slot/	Enter the port-type slot and port PFC information.
port[] pfc
{summary	Enter the keyword summary for a summary list of results or
detail}	enter the keyword detail for a full list of results.
INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Usage Information

VersionDescription

9.2.(0.0) Down status messages added.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.16.0Introduced on the MXL 10/40GbE Switch IO Module.

To clear the PFC TLV counters, use the clear pfc counters interface port-type slot/port[] command.

The following describes the show interface pfc summary command shown in the following example.

Field	Description
Interface	Interface type with stack-unit and port number.
Admin mode is on	PFC admin mode is on or off with a list of the configured
Admin is enabled	PFC priorities. When the PFC admin mode is on, PFC
	advertisements are enabled to be sent and received from
	peers; received PFC configuration take effect. The admin
	operational status for a DCBX exchange of PFC
	configuration is enabled or disabled.
Remote is	Operational status (enabled or disabled) of peer device for
enabled, Priority	DCBX exchange of PFC configuration with a list of the
list Remote	configured PFC priorities. Willing status of peer device for

482 Data Center Bridging (DCB)