Command Modes

Command History

Related Commands

CONFIGURATION (conf-lldp)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.7.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series and E-Series.

debug lldp interface — debugs LLDP.

show lldp neighbors — displays the LLDP neighbors.

advertise med location-identification

To advertise a location identifier, configure the system.

S6000

Syntaxadvertise med location-identification {coordinate-based value civic-based value ecs-elin value}

To return to the default, use the no advertise med location- identification {coordinate-basedvalue civic-basedvalue ecs-elinvalue} command.

Parameters

Enter the keywords coordinate-basedthen the

coordinate-

based value

coordinated based location in hexadecimal value of 16 bytes.

civic-based

Enter the keywords civic-basedthen the civic based

value

location in hexadecimal format. The range is from 6 to 255

 

bytes.

ecs-elin value

Enter the keywords ecs-elinthen the Emergency Call

 

Service (ecs) Emergency Location Identification Number

 

(elin) numeric location string. The range is from 10 to 25

 

characters.

Link Layer Discovery Protocol (LLDP)

967

Page 967
Image 967
Dell 9.7(0.0) manual Advertise med location-identification, Coordinate, Based value, Civic-based, Ecs-elin value