Related Commands

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.2.1.1Introduced.

vlan bridge-priority — sets the bridge-priority value.

vlan hello-time — changes the time interval between BPDUs.

vlan max-age — changes the time interval before PVST+ refreshes.

show spanning-tree pvst — displays the PVST+ configuration.

vlan hello-time

Set the time interval between generation of PVST+ 7 BPDUs.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

vlan vlan-range hello-timeseconds

To return to the default value, use the no vlan hello-timecommand.

vlan vlan-range

Enter the keyword vlan then the VLAN numbers. The range

 

is from 1 to 4094.

hello-time

Enter the keywords hello-timethen the time interval, in

seconds

seconds, between transmission of BPDUs. The range is from

 

1 to 10 seconds. The default is 2 seconds.

2 seconds

CONFIGURATION (conf-pvst)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

1242

Per-VLAN Spanning Tree Plus (PVST+)

Page 1242
Image 1242
Dell 9.7(0.0) manual Vlan hello-time, Hello-time