Dell 9.7(0.0) manual Show ip pim neighbor, Show ip pim vrf vrf-name neighbor

Field	Description
DR	Displays the IP address of the Designated Router for that
	interface.

The show ip pim interface command does not display information corresponding to the loop-back interfaces.

Example	Dell#show ip pim interface			Nbr	Query	DR	DR
	Address	Interface Ver/
	165.87.34.5	Te 1/10	Mode	Count	Intvl	Prio
			v2/S	0	30	1
	165.87.34.5	Vl 10	v2/S	1	30	1
	10.1.1.2
	10.1.1.2	Vl 20	v2/S	1	30	1
	20.1.1.5
	20.1.1.5	Vl 30	v2/S	1	30	1
	165.87.31.200
	165.87.31.201

show ip pim neighbor

View PIM neighbors.

S6000

Syntax	show ip pim [vrf vrf-name] neighbor
Parameters	vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of

the VRF to configure this setting on that VRF.

NOTE: Applies to specific VRF if input is provided, else applies to Default VRF.

Command Modes

Command History

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Added support for VRF. Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

1206 PIM-Sparse Mode (PIM-SM)