Dell 9.7(0.0) manual Show vrrp, Dellconf-if-vrid-4#show config, Vrrp-group, Virtual-address

VersionDescription

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.2.1.1Introduced on the E-Series.

Example	Dell(conf-if-vrid-4)#show config
	vrrp-group 4
	virtual-address 119.192.182.124
	!

show vrrp

View the VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns No Active VRRP group.

S6000

Syntaxshow vrrp [vrrp-id] [vrf vrf-name] [interface] [brief][ipv6]

Parameters	(OPTIONAL) Enter the Virtual Router Identifier for the VRRP
vrrp-id
	group to view only that group. The range is from 1 to 255.
vrf vrf-name	(OPTIONAL) Enter the keyword vrf and then the name of
	the VRF to view active VRRP groups corresponding to that
	VRF.
interface	(OPTIONAL) Enter the following keywords and slot/port or
	number information:

Command Modes

• For Port Channel interface types, enter the keywords

	port-channelthen the number. The range is from 1 to
	128.
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a VLAN interface, enter the keyword vlan then the
	VLAN ID. The VLAN ID range is from 1 to 4094.
brief	(OPTIONAL) Enter the keyword brief to view a table of
	information on the VRRP groups.
ipv6	(OPTIONAL) Enter the keyword ipv6 to view only VRRP IPv6
	groups.

•EXEC

•EXEC Privilege

Virtual Router Redundancy Protocol (VRRP) 1669