Defaults

Command Modes

Command History

Usage Information

group-address

(OPTIONAL) Enter the IP multicast group address in dotted

 

decimal format.

interface

Enter the following keywords and slot/port or number

interface

information:

 

• For a 10-Gigabit Ethernet interface, enter the keyword

 

TenGigabitEthernet then the slot/port information.

 

• For a 40-Gigabit Ethernet interface, enter the keyword

 

fortyGigE then the slot/port information.

 

• For a port channel interface, enter the keywords port-

 

channel then a number.

Disabled.

 

EXEC Privilege

 

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S4810, S4820T, S5000, S6000, S6000–

 

ON, Z9000, and Z9500.

IGMP commands accept only non-VLAN interfaces — specifying VLAN does not yield results. This command displays packets for IGMP and IGMP snooping.

ip igmp snooping enable

Enable IGMP snooping on all or a single VLAN. This command is the master on/off switch to enable IGMP snooping.

Syntax

Defaults

Command Modes

Command History

ip igmp snooping enable

To disable IGMP snooping, use the no ip igmp snooping enable command.

Disabled.

CONFIGURATION

INTERFACE VLAN

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Internet Group Management Protocol (IGMP)

655

Page 655
Image 655
Dell 9.7(0.0) manual Ip igmp snooping enable