Dell 9.7(0.0) manual Show ip pim interface, Parameters Command Modes Command History Example

Parameters

Command Modes

Command History

Example

vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of
	the VRF to configure this setting on VRF.
	NOTE: Applies to specific VRF if input is provided, else
	applies to Default VRF.

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Added support for VRF. Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Introduced on the S-Series.

Dell#show ip pim bsr-router

PIMv2 Bootstrap information

This system is the Bootstrap Router (v2)

BSR address: 7.7.7.7 (?)

BSR Priority: 0, Hash mask length: 30

Next bootstrap message in 00:00:08

This system is a candidate BSR

Candidate BSR address: 7.7.7.7, priority: 0, hash mask length: 30

show ip pim interface

View information on the interfaces with IP PIM enabled.

S6000

Syntax	show ip pim [vrf vrf-name] interface
Parameters	vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of

the VRF to configure this setting on this VRF.

1204 PIM-Sparse Mode (PIM-SM)