Dell 9.7(0.0) manual Show software ifm, Clients, Ifagt number, Ifcb interface

show software ifm

Display interface management (IFM) data.

Syntaxshow software ifm {clients [summary] ifagt number ifcb interface stack-unit unit-ID trace-flags}

Parameters	Enter the keyword clients to display IFM client
clients
	information.
summary	(OPTIONAL) Enter the keyword summary to display brief
	information about IFM clients.
ifagt number	Enter the keyword ifagt then the number of an interface
	agent to display software pipe and IPC statistics.
ifcb interface	Enter the keyword ifcb then one of the following interface
	IDs then the slot/port information to display interface control
	block information for that interface:
	• For a port channel interface, enter the keywords port-
	channel then a number. The range is from 1 to 128.
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
stack-unit unit-	Enter the keyword stack-unitthen the stack member
ID	number to display IFM information for that unit.
	NOTE: This option is only available on the S-Series.

Defaults

Command Modes

Command History

trace-flags	Enter the keyword trace-flagsto display IFM information
	for internal trace flags.
none

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

142 Control and Monitoring