addr(s) Description

---------------------------------------------------------------

-----------------------------------

Te 1/0 IPv4 20 100 Y

Master 10.0.0.3

10.0.0.2

Dell#

 

 

track

Monitor an interface and lower the priority value of the VRRP group on that interface if it is disabled.

Syntax

track interface [priority-cost cost]

 

To disable monitoring, use the no track interface command.

Parameters

interface

(OPTIONAL) Enter the following keywords and slot/port or

 

 

 

number information:

 

 

• For a 10-Gigabit Ethernet interface, enter the keyword

 

 

TenGigabitEthernet then the slot/port information.

 

 

• For a Loopback interface, enter the keyword loopback

 

 

then a number from 0 to 16383.

 

 

• For Port Channel interface types, enter the keywords

 

 

port-channelthen a number.

 

 

• For a 40-Gigabit Ethernet interface, enter the keyword

 

 

fortyGigE then the slot/port information.

 

 

• For a VLAN interface, enter the keyword vlan followed

 

 

by the VLAN ID. The VLAN ID range is from 1 to 4094.

 

priority-cost

(OPTIONAL) Enter a number as the amount to be subtracted

 

 

from the priority value. The range is 1 to 254. The default is

 

 

10.

Defaults

priority cost = 10

 

Command

VRRP

 

Modes

 

 

Command History

Usage Information

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

7.6.1.0Introduced on the S-Series (S50 only).

7.5.1.0Introduced on the C-Series.

6.2.1.1Introduced on the E-Series.

If the interface is disabled, the cost value is subtracted from the priority value and forces a new MASTER election if the priority value is lower than the priority value in the BACKUP virtual routers.

Virtual Router Redundancy Protocol (VRRP)

1673

Page 1673
Image 1673
Dell 9.7(0.0) manual Track interface priority-cost cost, Priority-cost