Command Modes

l2acl number ipv4acl number ipv6acl number, ipv4qos number l2qos numberl2pt number ipmacacl number ecfmacl number {nlbclusteracl] [vman-qos vman-dual-qosnumber] ipv4pbr numberopenflo w {48} fcoe number [iscsioptacl number] [vrfv4acl number]

CONFIGURATION

Allocate space to each CAM region.

Enter 4 or 8 for the number of OpenFlow FP blocks.

•4: Creates 242 entries for use by the OpenFlow controller (256 total entries minus the 14 entries reserved for internal functionality)

•8: Creates 498 entries for use by the OpenFlow controller (512 total entries minus the 14 entries reserved for internal functionality)

The fcoe range is 0–6 groups. Each group has 128 entries; the value given must be an even number. This information is stored in the NVRAM and is effective after rebooting the switch.

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Added the nlbcluster ACL keyword. Introduced on the

 

S6000-ON.

9.4.(0.0)

Added support for PBR and VRF.

9.2(0.2)

Added support for fcoe.

9.1.(0.0)

Added support for OpenFlow.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.10.2Clarified block information for the S4810.

8.3.10.0Introduced on the S4810.

8.3.1.0Added the keywords ecfmacl, vman-qos, and vman- dual-qos.

462

Content Addressable Memory (CAM)

Page 462
Image 462
Dell 9.7(0.0) manual Command Modes