graceful-restart restart-wait

Enable the graceful restart maximum wait time before a restarting peer comes up.

Syntax

NOTE: Set the t3 timer to adjacency on the restarting router when

 

 

implementing this command.

 

graceful-restart restart-wait seconds

 

To return to the default, use the no graceful-restartrestart-wait

 

command.

Parameters

Defaults

Command Modes

Command History

Related Commands

seconds

Enter the graceful restart time in seconds. The range is from

 

5 to 300 seconds. The default is 30 seconds.

30 seconds

 

ROUTER ISIS

 

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

8.3.1.0Introduced on the E-Series.

graceful-restart t3 — configures the overall wait time before graceful restart completes.

graceful-restart t1

Set the graceful restart wait time before unacknowledged restart requests are generated. This wait time is the interval before the system sends a restart request (an IIH with RR bit set in Restart TLV) until the CSNP is received from the helping router.

Syntaxgraceful-restart t1 {interval seconds retry-times value}

To return to the default, use the no graceful-restart t1 command.

860

Intermediate System to Intermediate System (IS-IS)

Page 860
Image 860
Dell 9.7(0.0) manual Graceful-restart t1, Graceful-restart restart-wait seconds