Dell 9.7(0.0) manual Neighbor advertisement-interval, Group-name advertisement-interval command

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.8.0Introduced on the S4810.

Related	bgp add-path — allows the advertisement of multiple paths for the same address
Commands	prefix without the new paths implicitly replacing any previous ones.

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.

S6000

Syntaxneighbor {ip-address peer-group-name} advertisement-interval

seconds

To return to the default value, use the no neighbor {ip-addresspeer-

group-name} advertisement-interval command.

Parameters

Defaults

Command Modes

Command History

ip-address	(OPTIONAL) Enter the IP address of the neighbor in dotted
	decimal format.
peer-group-	Enter the name of the peer group to set the advertisement
name	interval for all routers in the peer group.
seconds	Enter a number as the time interval, in seconds, between
	BGP advertisements. The range is from 0 to 600 seconds.
	The default is 5 seconds for internal BGP peers and 30
	seconds for external BGP peers.

•seconds = 5 seconds (internal peers)

•seconds = 30 seconds (external peers)

ROUTER BGP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Border Gateway Protocol 381