Dell 9.7(0.0) Dellconf#ip host vrf jay dell, Clear host vrf vrf-name * host-name, Host-name

Parameters

Defaults

Command Modes

Command History

Usage Information

Example

To undo the host name server to IP address mapping for VRFs, use the no ip host [vrf vrf-name]name ip-addresscommand.

vrf vrf-name	(Optional) Enter the key word vrf and then the name of the
	VRF to configure the name server to IP address mapping for
	that VRF.
name	Enter the name od the host to be associated with an IP
	address.
ip-address	Enter the IP address of the name server in dotted decimal
	format.
None
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4.(0.0)	Introduced on the S-Series and Z-Series.

Use this command to create a mapping between a host name server and its IP addresses for a specific VRF.

Dell(conf)#ip host vrf jay dell 1.1.1.1

clear host

Removes one or all dynamically learned host table entries for a specific VRF.

Syntax	clear host [vrf vrf-name] {* host-name}
Parameters	vrf vrf-name	(Optional) Enter the key word vrf and then the name of the
		VRF to delete dynamically learned host table entries
		corresponding to that VRF.
	host-name	Enter the name of the host corresponding to which you
		want to delete the dynamically learnt host table entries.
	*	Enter * to delete all host table entries.
Defaults	None

Dynamic Host Configuration Protocol (DHCP) 581