Dell 9.7(0.0) manual Service-policy output, Service-policy input policy-map-name command

	NOTE: The service-policycommands are not allowed on a port channel.
	The service-policy input policy-map-name command and the
	service-class dynamic dot1p command are not allowed simultaneously
	on an interface.
Related	policy-map-input — creates an input policy map.
Commands

service-policy output

Apply an output policy map to the selected interface.

S6000

Syntax service-policy output policy-map-name

Parameters

Defaults

Command Modes

Command History

Usage Information

Related Commands

To remove the output policy map from the interface, use the no service- policy output policy-map-namecommand.

policy-map-	Enter the name for the policy map in character format (32
name	characters maximum). You can identify an existing policy
	map or name one that does not yet exist.
none
INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

A single policy-map can be attached to one or more interfaces to specify the service-policy for those interfaces.

policy-map-output — creates an output policy map.

1272 Quality of Service (QoS)