Related

class-map — identifies the class map.

Commands

 

 

service-policy input — applies an input policy map to the selected interface.

 

service-policy output — applies an output policy map to the selected interface.

set

Mark outgoing traffic with a differentiated service code point (DSCP) or dot1p value.

S6000

Syntax

set {ip-dscp value mac-dot1p value}

Parameters

ip-dscp value

(OPTIONAL) Enter the keywords ip-dscpthen the IP DSCP

 

 

 

value. The range is from 0 to 63.

 

mac-dot1p

Enter the keywords mac-dot1pthen the dot1p value. The

 

value

range is from 0 to 7.

Defaults

Command Modes

Command History

none

CONFIGURATION (conf-qos-policy-in)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

Usage

After the IP DSCP bit is set, other QoS services can then operate on the bit settings.

Information

 

show qos class-map

View the current class map information.

S6000

Syntax

show qos class-map [class-name]

1274

Quality of Service (QoS)

Page 1274
Image 1274
Dell 9.7(0.0) manual Set, Show qos class-map, Parameters Ip-dscp value, Mac-dot1p