Dell 9.7(0.0) manual Boot zero, Defaults Command Modes

Command History

Example

Version 9.0.2.0 Introduced on the S6000.

BOOT_USER # boot write net config retries 2 Updated number of Network Boot Config retries to 2 BOOT_USER #

boot zero

Erase the configured primary, secondary, or default boot image parameters. If you erase all three parameters, the S6000 switch boots from its internal Flash.

S6000

Syntax	boot zero primary secondary default}
Parameters	primary	Enter the keyword primary to configure the boot parameters
		used in the first attempt to boot the system.
	secondary	Enter the keyword secondary to configure boot parameters
		used if the primary operating system boot selection is not
		available.

Defaults

Command Modes

default

None

BOOT_USER

Enter the keyword default to configure boot parameters used if the secondary operating system boot parameter selection is not available. You can configure this option to any of the available type, for example flash/usb/ftp/tftp.

Command History

Usage Information

Version 9.0.2.0 Introduced on the S6000.

This command reverses changes made with the boot change command.

BOOT_USER # boot zero primary

BOOT_USER # boot zero secondary

BOOT_USER # boot zero default

BOOT_USER # show bootvar

PRIMARY OPERATING SYSTEM BOOT PARAMETERS:

326 Boot Command Line Interface