Dell 9.7(0.0) manual Command Modes Command History, Ip-address

Command Modes

Command History

ipv4 multicast	(OPTIONAL) Enter the keyword ipv4 followed by the
	keyword multicast to view information related only to ipv4
	multicast routes.
ipv4 unicast	(OPTIONAL) Enter the keyword ipv4 followed by the
	keyword unicast to view information related only to ipv4
	unicast routes.
ipv6 unicast	(OPTIONAL) Enter the keyword ipv6 followed by the
	keyword unicast to view information related only to ipv6
	unicast routes.
ip-address	(OPTIONAL) Enter the IP address (in dotted decimal format)
	of the BGP network to view information only on that
	network.
mask	(OPTIONAL) Enter the network mask (in slash prefix (/x)
	format) of the BGP network address.
filter-list as-	(OPTIONAL) Enter the keyword filter-listthen the
path-name	name of a configured AS-PATH ACL. The range is 140
	characters.
regexp regular-	Enter a regular expression then use one or a combination of
expression	the following characters to match. The range is 256
	characters.
	• . = (period) any single character (including a white
		space).
	• * = (asterisk) the sequences in a pattern (zero or more
		sequences).
	• + = (plus) the sequences in a pattern (one or more
		sequences).
	• ? = (question mark) sequences in a pattern (either zero or
		one sequences).
		NOTE: Enter an escape sequence (CTRL+v) prior to
		entering the ? regular expression.
	•	[ ] = (brackets) a range of single-character patterns.
	•	( ) = (parenthesis) groups a series of pattern elements
		to a single element.
	•	{ } = (braces) minimum and the maximum match count.
	• ^ = (caret) the beginning of the input string. If you use

the caret at the beginning of a sequence or range, it matches on everything BUT the characters specified.

• $ = (dollar sign) the end of the output string.

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

Border Gateway Protocol 433