Usage Information

Related Commands

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.7.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series.

Advertise the Extended Power via MDI on all ports that are connected to an 802.3af powered, LLDP-MED endpoint device.

debug lldp interface — debugs LLDP.

show lldp neighbors — displays the LLDP neighbors.

advertise med softphone-voice

To advertise softphone to enable IP telephony on a computer so that the computer can be used as a phone, configure the system.

S6000

Syntaxadvertise med softphone-voice {vlan-id layer2_priority

DSCP_value} {priority-tagged number}

To return to the default, use the no advertise med softphone-voice

{vlan-id layer2_priority DSCP_value} {priority-taggednumber} command.

Parameters

Defaults

Command Modes

Command History

vlan-id

Enter the VLAN ID. The range is from 1 to 4094.

layer2_priority

Enter the Layer 2 priority (C-Series and E-Series only). The

 

range is from 0 to 7.

DSCP_value

Enter the DSCP value (C-Series and E-Series only). The range

 

is from 0 to 63.

priority-tagged

Enter the keywords priority-taggedthen the Layer 2

number

priority. The range is from 0 to 7.

unconfigured.

CONFIGURATION (conf-lldp)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

Link Layer Discovery Protocol (LLDP)

969

Page 969
Image 969
Dell 9.7(0.0) manual Advertise med softphone-voice, Usage Information Related Commands VersionDescription 70.0