Nlynx NEWPORT 9000 Replacing Filters, Replacing UV Lamp, Cleaning And Maintenance Cont

Advanced PureAirTM Newport 9000 Owner’s Manual

CLEANING AND MAINTENANCE (CONT.)

Replacing Filters

Please change filter when the REPLACE FILTER indicator is glowing.

Note: Please refer to page 7 for instructions on filter installation and removal.

Replacing UV Lamp

The life span of UV lamp is about 5,000 hours. Replace UV lamp when it is damaged or when no blue light is observed.

Remove the Front Face Plate, Washable Pre-Filter, Washable Plasma Dust Filter, and HEPA/Charcoal filter before replacing the UV lamp (refer to page 7 on how to dissemble).

Softly twist the UV lamp, remove the lamp from its position, and insert a lamp tube of the same model.

Resetting the CLEAN METAL GRID and REPLACE FILTER Indicators

After cleaning and replacing filters, reset the CLEAN METAL GRID and REPLACE FILTER indicators. Otherwise the two indicators will remain on after servicing the unit. The unit must be plugged but turned off to reset the CLEAN METAL GRID and REPLACE FILTER indicators. The RESET button is inside the unit (cannot be reached with finger). Please use a toothpick, straightened paper clip or other similar shaped object to push the RESET button.

How to Reset: 1. CLEAN METAL GRID Indicator When the unit is plugged in, but turned off, the resetting process for the CLEAN METAL GRID indicator is done by pushing both the RESET and the TIMER buttons at the same time.

2. REPLACE FILTER Indicator When the unit is plugged in, but turned off, the resetting process for the REPLACE FILTER indicator is done by Pushing both the RESET and the FLOW buttons at the same time.

11