Nlynx NEWPORT 9000 Cleaning And Maintenance Cont, Clean the Plasma Dust Filter, Plastic Wrap

Advanced PureAirTM Newport 9000 Owner’s Manual

CLEANING AND MAINTENANCE (CONT.)

The Cleaning and Maintenance of the Washable Plasma Dust Filter (Cont.)

4. Clean the Plasma Dust Filter

Use mild detergent or plain water only.

Use a soft scouring pad or toothbrush to clean the dust collector.

Use warm water (below 40° C) only!

5.If dust and dirt does not wash away easily, pre-soak with diluted detergent and then use a toothbrush to scrub.

Please take care not to damage any wiring while cleaning the dust collector If any electrical discharge wire is broken, the device will lose part or

all of its dust collecting capability.

Any broken wire should be thrown away instead of being left inside the unit.

Otherwise, a dangerous short-circuit or high-voltage sparks may occur.

Please contact info@realspiritusa.com for additional electrical discharge wire.

Please do not clean using acidic or alkaline detergent that can create rust on the surface of device.

Plastic Wrap

6. Thoroughly dry all washed parts.

After cleaning, please completely dry the unit before use.

Operating a wet unit may cause electrical shock or malfunction.

If the front cover of the plasma dust collector is not properly installed, the unit will not function.

Please make sure the plastic wrap for the electrical discharge wire is located in its proper position.

10