Nlynx NEWPORT 9000 Operating Instructions, Locate the Unit, How to Start, Fan Modes, Timed ON/OFF

Advanced PureAirTM Newport 9000 Owner’s Manual

OPERATING INSTRUCTIONS

Locate the Unit

Place the Newport 9000 against a wall, near an electric outlet with 12-15 inches clearance on the front and sides. It is best to place the unit where it will be out of any children's play area.

How to Start

Plug the unit into a standard 120V/60Hz outlet. Press the POWER ON/OFF button. The device starts operating automatically and the negative-ion UV indicator will automatically turn on. Press POWER ON/OFF again and the device will turn off.

Fan Modes

This Newport 9000 has five different fan modes to choose from. Please choose a proper level of circulation according to indoor air quality and room size. As you press FAN,

the fan mode will change according to the number of times you press the button. The LED will show the following sequence of modes:

QUIET LOW MED HI AUTO

Automatic Operation

Keep pressing the FAN button until the device runs under automatic operation (the LED will show AUTO).

Under automatic operation, the device automatically switches to the proper running modes (MED or LOW) according to the level of odor, dust, or irritants in the air as detected by the sensor. As the air is purified, the device will auto- matically switch back to LOW or QUIET modes.

Timed ON/OFF

Press AUTOTIMER button to set operation timing.

Under the AUTOTIMER function, the operation timing will be set according to the number of times you press the AUTOTIMER button. The LED will show the following sequence of timing:

1 HOUR 2 HOUR 8 HOUR

6