Usage

To specify a distance for routes learned from other routing domains, use the

Information

redistribute command.

distribute-list in

Apply a filter to incoming routing updates from OSPF to the routing table.

S6000

Syntaxdistribute-listprefix-list-name in [interface]

To delete a filter, use the no distribute-listprefix-list-namein [interface] command.

Parameters

Enter the name of a configured prefix list.

prefix-list-

name

 

interface

(OPTIONAL) Enter one of the following keywords and slot/

 

port or number information:

Defaults

Command Modes

Command History

For Port Channel groups, enter the keywords port- channel then a number. For the C-Series, S-Series, and Z9000, the range is from 1 to 128.For Z9500, the range is from 1 to 512.

For a SONET interface, enter the keyword sonet then the slot/port information.

For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.

For a VLAN, enter the keyword vlan then a number from 1 to 4094.

Not configured.

ROUTER OSPF

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

1074

Open Shortest Path First (OSPFv2 and OSPFv3)

Page 1074
Image 1074
Dell 9.7(0.0) manual Distribute-list, Redistribute command, Parameters Enter the name of a configured prefix list