Dell 9.7(0.0) manual Mac, Address

Related Commands

interface tengig 1/17 in

Extended mac access-list snickers on TenGigabitEthernet 1/17 seq 10 permit any any ev2 eq 800 count bytes (559851886 packets 191402152148

bytes)

seq 20 permit any any ev2 eq 806 count bytes (74481486 packets 5031686754

bytes)

seq 30 permit any any ev2 eq 86dd count bytes (7751519 packets 797843521 bytes)

mac access-list standard — configures a standard MAC access list.

show mac accounting access-list — displays MAC access list configurations and counters (if configured).

permit

To pass packets matching the criteria specified, configure a filter.

Syntaxpermit {any host mac-address mac-source-addressmac-source-address-mask} {any host mac-address mac-destination-addressmac-destination-address-mask} [ethertype operator] [count [byte]] [log] [monitor]

To remove this filter, you have two choices:

•Use the no seq sequence-numbercommand if you know the filter’s sequence number.

•Use the no permit {any host mac-address mac-source-address mac-source-address-mask} {any mac-destination-address mac- destination-address-mask}command.

Parameters	Enter the keyword any to forward all packets.
any
host	Enter the keyword host then a MAC address to forward
	packets with that host address.
mac-source-	Enter a MAC address in nn:nn:nn:nn:nn:nn format.
address
mac-source-	(OPTIONAL) Specify which bits in the MAC address must
address-mask	match.
	The MAC ACL supports an inverse mask; therefore, a mask of
	ff:ff:ff:ff:ff:ff allows entries that do not match and a mask of
	00:00:00:00:00:00 only allows entries that match exactly.
mac-	Enter the destination MAC address and mask in
destination-	nn:nn:nn:nn:nn:nn format.
address

Access Control Lists (ACL) 235