Command Modes

Command History

Usage Information

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0

Introduced on the E-Series.

With password authentication enabled, you can authenticate using the local, RADIUS, or TACACS+ password fallback order as configured.

ip ssh rekey

Configures the time rekey-interval or volume rekey-limit threshold at which to re-generate the SSH key during an SSH session.

Syntax

ip ssh rekey [time rekey-interval] [volume rekey-limit]

 

To reset to the default, use no ip ssh rekey [time rekey-interval]

 

[volume rekey-limit]command.

Parameters

time minutes

Enter the keywords time then the amount of time in

 

 

 

minutes. The range is from 10 to 1440 minutes. The default is

 

 

60 minutes

 

volume rekey-

Enter the keywords volume then the amount of volume in

 

limit

megabytes. The range is from 1 to 4096 to megabytes. The

 

 

default is 1024 megabytes

Defaults

The default time is 60 minutes. The default volume is 1024 megabytes.

Command

CONFIGURATION mode

Modes

 

 

1428

Security

Page 1428
Image 1428
Dell 9.7(0.0) manual Ip ssh rekey time rekey-interval volume rekey-limit, Time minutes