Dell 9.7(0.0) manual Clear ip igmp snooping groups, Debug ip igmp snooping

clear ip igmp snooping groups

Clear snooping entries from the group cache table.

S6000

Syntax

Parameters

Command Modes

Command History

clear ip igmp snooping groups [group-address interface

interface]

group-address	(OPTIONAL) Enter the IP multicast group address in dotted
	decimal format.
interface	Enter the following keywords and slot/port or number
interface	information:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a port channel interface, enter the keywords port-
	channel then a number.
EXEC

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

	Version	Description
	9.7(0.0)	Introduced on S-Series and Z–Series.
Usage	IGMP commands accept only non-VLAN interfaces — specifying VLAN does not
Information	yield results.

debug ip igmp snooping

Enable debugging of IGMP snooping packets on interfaces and groups.

S6000

Syntax	debug ip igmp snooping [group address interface]
	•	To disable debugging of IGMP snooping, use the no debug ip igmp
		snooping [group address interface] command.
	•	To disable all debugging, use the undebug all command.

Parameters	snooping	Enter the keyword snooping to enable debugging of IGMP
		snooping.

654 Internet Group Management Protocol (IGMP)