Dell 9.7(0.0) manual Show ip igmp snooping groups

Version	Description
7.5.1.0	Introduced on the C-Series.
E-Series legacy
command

Usage	This command enables the IGMP switch to send General Queries periodically. This
Information	behavior is useful when there is no multicast router present in the VLAN because
	the multicast traffic is not routed. Assign an IP address to the VLAN interface for the
	switch to act as a querier for this VLAN.

show ip igmp snooping groups

Display snooping related information for all the IGMP groups, interface or one group of one interface.

S6000

Syntax

Parameters

Command Modes

Command History

show ip igmp snooping groups [group-address [detail] detail

interface [group-address [detail]]]

snooping	Enter the keyword snooping to display snooping related
	information.
group-address	(OPTIONAL) Enter the group address in dotted decimal
	format to view information on that group only.
interface	(OPTIONAL) Enter the interface type and slot/port
	information:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a Loopback interface, enter the keyword loopback
	then a number from 0 to 16383.
	• For a port channel interface, enter the keywords port-
	channel then a number.
	• For a VLAN interface, enter the keyword vlan then a
	number from 1 to 4094.
detail	(OPTIONAL) Enter the keyword detail to display the
	IGMPv3 source information.

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Internet Group Management Protocol (IGMP) 661