Version

Description

9.7(0.0)

Added support for VRF. Introduced on the S6000-ON.

9.5(0.0)

Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Introduced on the C-Series and S-Series.

7.6.1.0Introduced on the E-Series.

Usage

Do not enter this command before creating the access-list.

Information

 

ip pim query-interval

Change the frequency of PIM Router-Query messages.

Syntax

ip pim query-interval seconds

Parameters

Defaults

Command Modes

Command History

To return to the default value, use the no ip pim query-intervalseconds command.

seconds

Enter a number as the number of seconds between router

 

query messages. The range is from 0 to 65535. The default is

 

30 seconds.

30 seconds

 

INTERFACE

 

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.5(0.0)

Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

PIM-Sparse Mode (PIM-SM)

1195

Page 1195
Image 1195
Dell 9.7(0.0) manual Ip pim query-interval seconds